Gutter Repair in South Florida

Is your gutter worth repairing, or is it time to replace it?

The symptom tells us where to look. The condition of the aluminum, the fascia behind it and the size of the gutter tell us what to recommend. Here is how that usually shakes out.

When the evidence points to new gutters, our gutter replacement service explains how a tear-off and reinstall works, and the guide on deciding between gutter repair and replacement goes through the same reasoning in more depth.

Leaks, sags and roof-edge drips: the repairs we handle most

Three problems make up most of our repair calls. Each one has its own page with the full detail.

• Resealing or rebuilding corner miters, end caps and drop outlets
• Hanger replacement and re-pitching of sagging or backward-sloped runs
• Reconnecting downspouts that have separated from their outlets
• Closing gaps at the roof edge where water slips behind the gutter
• Written notes on any fascia rot, soffit stains or corrosion we find

Water dripping from seams, corners or end caps

A seamless gutter only has joints where it must: the miters at each corner, the end caps and the outlets where downspouts drop. Those joints are where sealant ages first in our heat. Our leaking gutter repair work covers scraping out failed caulk, re-riveting and resealing, or rebuilding a corner that has gone too far.

Runs that sag, pull away or hold standing water

When hangers back out of the fascia, the gutter tips forward and water pools in the low spots. Sagging gutter repair and re-pitching means re-hanging that run on new hidden hangers and setting a steady fall toward the outlet.

Leaks at the roof edge, behind the gutter

Sometimes the gutter is fine and the water is sneaking behind it, down the fascia and into the soffit. Our roof-edge leak repair closes the gap between the drip edge and the gutter, and we are upfront when a leak belongs to a roofer instead.

Gutter hanger replacement, end caps and corner leaks: where most fixes start

Most repairs come down to a handful of small parts. Knowing which one failed tells us whether the fix is quick or a sign of something bigger.

• Hangers. Hidden hangers hold the gutter to the fascia with a single screw. In soft or damp wood the screw strips and the hanger lets go. Older homes may still have spikes and ferrules, which loosen with every storm; we swap them for screwed hidden hangers.
• End caps. The cap is crimped and sealed onto the end of the run. UV and summer roof heat break down the sealant, and a cap that was never riveted can work itself off. Gutter end cap repair usually means a new cap, rivets and fresh sealant.
• Corners. A gutter corner leak is the complaint we hear most. Two roof planes, often a valley, dump water into the same joint, so it takes the heaviest flow and the most debris.
• Outlets. The drop outlet where the downspout connects can crack or separate, especially after a mower or ladder knocks the downspout.
• Pitch. Every run needs a steady fall toward its outlet. Gutter pitch adjustment fixes runs that hold water or send it to the wrong end.

Gutter repair near me, including systems another company installed

Plenty of the homes we visit had gutters put up by a roofer's sub, a builder's crew or an outfit that no longer answers its phone. We don't need the original installer's paperwork to repair the work, and we don't steer you toward a full tear-off to win the job.

What we do need is a clear look. Some problems were built in from day one: hangers spaced too far apart, a run pitched backward, a single 3x4 downspout trying to drain a roof plane that needed two. When we spot an installation mistake, we explain which part of it a repair can solve and which part it cannot.

Typical before

Typical after

What happens on a repair visit, from ladder to cleanup?

1. We walk the whole system, not just the spot you pointed out, checking hangers, joints, outlets and the fascia behind them.
2. Where it helps, we run a hose into the gutter so you can see the drip or the low spot for yourself.
3. You get a written quote that lists each repair. Nothing starts until you approve it.
4. We do the work: old sealant scraped out, joints riveted and resealed, new hidden hangers driven into sound wood, and pitch reset against a string line.
5. We flush the gutter again to prove the fix, then haul away old parts and debris.
6. We follow up after the job, ideally after the next real rain, to confirm it is holding.

Our 3-year workmanship and 20-year materials warranty covers new installations. On repairs, the written quote spells out exactly what we fixed, so there is no question later about what was and was not touched.

What drives gutter repair cost?

We don't post repair prices, because two leaks that look identical from the driveway can take very different work. Your free estimate becomes a written quote built from these factors:

• How many joints, hangers or outlets need attention, and how many linear feet must be re-hung
• Story height and roof type; working below barrel tile takes more care than a one-story shingle roof
• Whether the fascia behind the gutter is solid or needs a section replaced first
• Debris to clear before repairs can start, such as packed black olive leaves or palm seed pods
• Downspout changes, like adding an outlet or reconnecting to an underground drain
• Access around pool cages, hedges and narrow side yards
• Gutter style: copper, half-round or box profiles take longer and use harder-to-match parts
• Corroded-through or cracked sections that have to be cut out rather than sealed

Gutter repair in Fort Lauderdale, Boca Raton and the cities between

Coastal homes in Pompano Beach tend to show corrosion at joints first. Mid-century houses in Fort Lauderdale are more likely to have old spike hangers, while long runs on newer homes in Coral Springs often lose their pitch. Farther north in Boca Raton, tile roofs and HOA color rules shape how a repair is done.

Who should repair your gutters, and what should you check first?

Permits, HOA review and contractor paperwork

Your city or county building department decides whether a repair needs a permit, not the contractor. Broward and Miami-Dade fall inside the Florida Building Code's High-Velocity Hurricane Zone, so fascia replacement or re-hanging long runs can draw more scrutiny there than resealing a corner. Many HOAs require architectural approval before a gutter color or profile changes. The Florida DBPR licenses contractors for structural work, so ask whoever you hire for any license or county competency card that applies, plus a current certificate of insurance. If fascia or framing is involved, call the permit desk before work starts.

Why homeowners call a family-owned crew for repairs

Chance has owned Southern Gutters FL since about 2020, and the business still runs on the promise it started with in West Palm Beach: free estimates through follow-up calls, start to finish. Quality and Value are the two tags our 54 Google reviewers pick most, and several mention removal-only jobs nobody else would take. Our insured crews work Monday to Friday, 9 to 5, and we accept Visa, Mastercard, American Express and Discover. Reviewers also mention gates latched for the dogs and cut edges painted, habits that carry over to small repairs.